Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring reverse Camera
#1
I purchased the reverse camera from Joying and it didn't come with instructions so I'm hoping to clarify:

1) The Power connector should be tied into a 12V, should this be a constant ON? or should it only be if car is in reverse.
2) What does the small red wire attach to (it comes off the RCA connector and goes to the head unit). Is this a 12V connector that should be attached to the reverse lights? How does this feed into the head unit? Or is this just to pull a 12V from the front of the car?

Thanks in advance!
Reply
#2
https://www.youtube.com/watch?v=wShXm8ScqnQ
Reply
#3
(10-31-2017, 10:02 PM)JardaL Wrote: https://www.youtube.com/watch?v=wShXm8ScqnQ

Yeah I saw this video and he talks about it at the 1 minute mark but his english is broken and I can only understand "please do not connect this wire". I was hoping for clarification.

Thanks,
Reply
#4
(10-31-2017, 01:12 AM)eliddon Wrote: I purchased the reverse camera from Joying and it didn't come with instructions so I'm hoping to clarify:

1) The Power connector should be tied into a 12V, should this be a constant ON? or should it only be if car is in reverse.
2) What does the small red wire attach to (it comes off the RCA connector and goes to the head unit). Is this a 12V connector that should be attached to the reverse lights? How does this feed into the head unit? Or is this just to pull a 12V from the front of the car?

Thanks in advance!

here is the blog on how to connect the rear camera : https://www.carjoying.com/Joying-blog/7.html
you can check as reference . the blog show the details .
Joying give your car new life.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)